Jul 03, 2015
It is the centering unit PVXB50R5.
A unit that enabled small size, light weight and load capacity of 50 kgf.
Load capacity: 50kgf (Applicable up to 100 kgf)
Horizontal stroke: 5mm (One swing)
The top plate lock mechanism: Included
The top plate lock holding force: 5kgf
Jun 19, 2015
It is centering unit PVXM300ER15.
Normally, the top plate is locked as the top plate unlocks when supplying air.
Load capacity: 300kgf
Horizontal stroke: 15mm (One swing)
Top plate locking force: 32kgf
Unlocking force when supply air is 0.4 MPa: 52kgf
Jun 19, 2015
It is a Press-fitting free guide unit FGU-D-2T-05.
Special unit that automatically corrects position error in press-fitting process of parts etc.
Used load (at press fitting): 2t
Horizontal stroke: ±0.5mm
Rotation angle
: At the origin top plate ±1.1°
: At 0.5 mm stroke ±0°
Repeat Accuracy: ±0.1mm (X, Y, θ)
Load capacity Press-fitting tool: 10kg
Weight: 1.4kg
Jun 11, 2015
It is a Horizontal centering unit PVXW20SR5.
A Unit that absorbs core misalignment when inserting work (holizontally) by sliding the top plate.
Load capacity: 20kgf
Horizontal stroke: 5mm (One swing)
Origin repeat accuracy: ±0.05mm (X, Y direction)
Restriction of top plate rotation: ±1.8° - 4.8°
The top plate center lock mechanism
The top plate lock holding force: 193kgf
May 11, 2015
PVX1000-5 (Special type)
Used to absorb vibrations of work pieces from vibration test equipment.
Load capacity: 9,800N (1,000kgf)
Horizontal stroke: 5mm (One swing)
The top plate return mechanism: Not Included
The top plate lock mechanism: Not Included
Apr 08, 2015
One step installation type Planeveyor PVP-T05B (special type) to be used on a special machine table.
Replacement also smoothly discharge dust holes improve durability.
Load capacity: 490N (50kgf)
Main and small balls material: SUJ2
Body material: POM
With dust discharge mechanism
One step mounting
Apr 02, 2015
Industry's smallest bolt type centering unit PVXM50B-5.
Used to positioning small work pieces.
Load capacity: 50kgf
Horizontal stroke: 5mm (One swing)
Origin repeat accuracy: 0.1mm (X, Y direction)
The top plate lock mechanism: Not Included
The top plate return mechanism: magnet
No restriction on the top plate rotation
*Clean room specification
Mar 19, 2015
It is a Profiling Centering unit PVXW10SR2N.
Compliance unit which can absorb core misalignment when inserting work by sliding the top plate.
Load capacity: 10kgf
Horizontal stroke: 2mm (One swing)
Origin repeat accuracy：±0.1mm (X, Y direction)
The top plate rotation regulation: ± 4.2° or less
The top plate center lock mechanism
The top plate return mechanism: magnet
The top plate lock holding force: 74.9kgf
Mar 17, 2015
It is a both load (Tensile Load and Compressive Load) type centering units PVXW200-2.
A special type centering unit that compensates errors in position in the press-fitting process and inserting process.
Maximum load capacity: 2000N (204kgf)
The top plate slide load: approximately 58.6N (6.0kgf)
Horizontal stroke: 2mm (One swing)
Origin repeat accuracy: ±0.1mm (X, Y direction)
No restriction on the top plate rotation
The top plate return mechanism: magnet
Mar 17, 2015
It is a Resin Type Planeveyor PV3BP-SS.
Recommended load capacity: 1.96N (0.2kgf)
Main ball material: PEEK
